Plastic Factory Products


In view of the progressive development of the Saudi economy in all aspects and in order to participate in this procession. We established Al Rajhi plastic factory to meet the growing demand in the field of Agriculture, construction, packing products, and household and PVC compound for industrial applications. Hereafter we can review some of our products as follows:

 

Agri-items section:
- Pe pipes/ hoses (from 13mm.up to 2” inside diameter) with/without filter
- UPVC pipes (size ranges from 10mm to 160mm)- data sheets is available.
- Agricultural sheet (green house plastic UV stabilized)- data sheets is available
- Packing nets for onion, vegetables and fruits etc.
- Fruits & vegetable packing crates/trays
- Dates packing boxes.
- Baler twin –rafia ropes- strapping tapes – agri-plastic tunnels.

 

Pipe section:
- Conduit pipe (LLDPE based with wire and without wire)
- Conduit pipe PVC based.
- Corrugated pipe (pp).
- PE foamed insulation pipes /tubes/sheets-data sheets is available
- Drainage and water supply PVC pipes of 10mm to 160mm to
- Hot water supply (therm-pipes and fittings) from 20mm to 90mm.

 

Film section:
- All kinds of shopping bags (printed up to 6 colors) LDPE, HDPE, LLDPE, PP etc.
- Bags used in laundry (plain and printed).
- Disposable sufra (in rolls and pieces) according to the latest designs and requirements.
- Agricultural sheets (green house, tunnel rolls) (with UV and other additives)
- Bricks and block packing sheets for shrink packing (thickness up to 300 microns)
- Printed rolls (various thickness, and length)
- Bakery bags, food packing bags, nylon bags #6 8 10 12 14, etc
- Pp bags and films are available in various dimensions.
- Recycled polyethylene (LD, HD PP, PS) is available.
- Stretch film (all sizes & specs.) –Data sheets is available.
- Cling film (all sizes & specs.)- Data sheets are available.

 

Injection section
-Clothe hangers
- House hold utensils
- Ice cream boxes
- Junction boxes.
Drinking straws.
Paper cores / plastic cores
 
 

PVC COMPOUNDS SECTION

This division produces different grades of PVC compounds and caCO3 in the name of AL RAJHI COMPOUNDS (RPF) for RIGID PVC, CABLE PVC, and FLEXIBLE PVC applications in circular cylinder and powder form according to customer’s requirement with Saudi and British standards. – Technical specifications are enclosed.

 

CABLES

Al Rajhi cable compound constitutes four insulations, two sheathing and two special grades of FRLS and HR cables with excellent electrical, mechanical physical and thermal properties in different tests conditions including ageing without ageing, low and high temperature, and special tests are carried out for FRLS and HR cables like OXYGEN INDEX, HALOGEN CONTENT, and SMOKE DENSITY
SOFT PVC
Compound for crystal clear hose- color flexible hose- rigid reinforces hose braided hose either for food or non-food application for shoes- shoe soles-sport shoes- foamed sandals – window gaskets and for flooring tiles are available.


RIGID PVC

Our rigid compounds are formulated for injection both high and low pressure fittings, pressure and non pressure PVC pipes, electrical conduit pipes, windows channels and trunk extrusion with good impact strength to meet BS and Saudi standards in various colors
 

 
CALCIUM CARBONATE (caCO3)

White (off) concentrate of calcium carbonate in polymer based HDPE, LDPE & PP used as filler for injection molding, blow molding and extrusion application.
 

U.P.V.C POPE:
are unaffected by acid, alkalis, salt, water, and most chemicals.
 

Material

Unplasticised Poly Vinyl Chloride

color

Grey White & Black

General properties

All values @20oc

Specific Gravity

1.42+_0.02

Flammable

Not supporting combustion

Softening point

80cor 176F

Tensile Strength

7000 psi or 483 bar

Specific heat

0.25 cal/g x1c

Coefficient of linear Expansion

5x10 mm/1c

Compressive Strength

9500 psi or 665 Bar

Flexural Strength

950 kg/cm

Modules of Elasticity

3.2 x 104 kg/cm

Impact Strength

4-4.5 joules

Water Absorption

<4mg/Cm

Surface Resistivity

10 Ohm/cm

Volume Resistivity

10 Ohm/cm

Dielectric Strength

>40kv/Mm

U.P.V.C Pipes according to SAS & DIN:

Nominal Outside Diameter
(mm)

Class2(4Bar) Class3(6Bar) Class4(10Bar)

Class5(16Bar)

Thickness (mm) Weight Kg/m Thickness (mm) Weight Kg/m Thickness (mm) Weight Kg/m Thickness (mm) Weight Kg/m
16             1.2 0.090
20             1.5 0.137
25         1.5 0.174 1.9 0.212
32         1.8 0.264 2.4 0.342
40     1.8 0.223 1.9 0.350 3 0.525
50     1.8 0.422 2.4 0.552 3.7 0.809
63     1.9 0.562 3.0 0.854 4.7 1.289
75 1.8 0.642 2.2 0.782 3.6 1.22 5.6 1.82
90 1.8 0.774 2.7 1.13 4.3 1.75 6.7 2.61
110 2.2 1.16 3.2 1.64 5.3 2.61 8.2 3.90
160 3.2 2.41 4.7 3.44 7.7 5.74 11.9 8.17
200 4 3.7 5.9 5.37 9.6 8.51 14.9 12.8
250 4.9 5.65 7.3 8.31 11.9 13.2 18.6 19.9
315 6.2 9.02 9.2 13.2 15.0 20.9 23.9 31.5
400 7.9 14.5 11.7 21.1 19.1 33.7 29.7 50.8
500 9.8 22.4 14.6 32.9 23.9 52.6    
360 12.4 35.7 18.4 52.2 30 83.2    

U.P.V.C Pipes according to ASTM D-1785 (for schedule 40 & 80):

Norma Size
(Inches)

Schedule 40

Schedule 80

Actual
Diameter
(mm)
Thickness
(mm)
Weight
Kg/M
Working Pressure (P.S.I)

Thickness
(mm)

Weight
Kg/M
Working Pressure (P.S.I)
½ 21.34 2.77 0.248 600 3.73 0.309 850
¾ 26.67 2.87 0.329 480 3.91 0.418 690
1 33.40 3.38 0.483 450 4.55 0.614 630
¼ 1 42.16 4.56 0.652 370 4.85 0.850 520
¼ 1 48.26 3.68 0.779 330 5.08 1.030 470
2 60.32 3.91 1.040 280 5.54 1.430 400
3 88.90 5.49 2.160 260 7.62 2.910 370
4 114.3 6.02 3.070 220 8.56 4.260 320
6 168.28 7.11 5.410 180 10.97 8.130 280

PVC Electric Pipes are produced in different size:

Width (m)

Thickness (mm)

Length (m)

Color
16 0.6 3 White or Grey
18 0.6 3 White or Grey
18 1.0 3 White or Grey
20 1.5 3 White or Grey
25 1.5 3 White or Grey
25 1.0 3 White or Grey
32 1.0 3 White or Grey

We manufacture the following sizes of the U.P.V.C.Trunking
(used for indoor electrical wiring and cable cover)

Width (m)

Thickness (mm)

Length (m)

Color
16 10 3 white
16 16 3 white
25 16 3 white
25 25 3 white
38 16 3 white
38 25 3 white
40 40 3 white
50 50 3 white
75 50 3 white
100 50 3 white
100 100 3 white
150 50 3 white
150 100 3 white

U.P.V.C Pipes according to ASTM D2241:
We produce pipes in white, grey, and black colors:

Nominal
Size
(Inches)
Outside
Dimension
(mm)

SDR 32.5 ,125 P.S.I

SDR 26 , 160 P.S.I SDR 21 , 200 P.S.I
Thickness
(mm)
Weight
Kg/M
Thickness
(mm)
Weight
Kg/M
Thickness
(mm)
Weight
Kg/M
½ 84.46 - - 1.8 0.385 2.12 0.520
2 60.32 1.8 0.490 2.5 0.680 - -
3 88.90 2.7 1.13 - - 5.4 2.79
4 114.30 3.5 1.85 - - - -
6 168.28 5.2 3.88 6.5 4.97 - -

Al Rajhi Plastic & Foam Factories produce tow kinds of pipes
1-Solvent Cement Joint.
2-Rubber Ring Joint.      


T: Socket Depth
D : o. d. Socket

Quality Control Testing:

Alrajhi Plastic & Foam Factories equipped with PVC Testing Means to insure the compliance for:

- Pressure test
- Impact test
- Chemical test
- Water absorption test
- Surface finish test